P110E

190F04 - P110E

Information saved in
DME

Fault code
190F04 - P110E

Fault text
Tank-venting system, function: function test, end of line

Fault description
The diagnostic function monitors the flow through the fuel
tank's EVAP vent line.

Condition for fault identification
Test condition:
The fault is recognized when the flow to the EVAP
evaporative emission valve is reduced.
Potential problem source(s):
- Tank evaporative emissions valve seizes in closed position
- Obstruction in line between tank and intake manifold
Terminal condition: none
Voltage condition:
- Electrical system voltage > 10 V
Temperature condition:
- Coolant temperature > 71 °C
- Ambient temperature. > 4 °C
Time condition:
- 180 sec.
Other conditions:
- Engine on
- Vehicle velocity = 0 km/h
- Tank EVAP system active

Condition for fault memory entry
This fault is logged in the control module's fault memory if
it remains present for longer than 30 sec.

Action in service
- Conduct fault diagnosis with the 'EVAP evaporative
emissions valve' test module

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- Possible rough running from engine
- Possible emission of fuel vapors, because no activated
charcoal filter purge

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: on
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: none

Service instruction
- none