P11AF

104502 - P11AF

Information saved in
DME

Fault code
104502 - P11AF

Fault text
Absolute pressure sensor 2, intake pipe: Short to earth

Fault description
The diagnostic function monitors the lower voltage limit on
the intake-manifold pressure sensor on Bank 2.

Condition for fault identification
Test condition:
The fault is recognized when the voltage of the intake-
manifold pressure sensor 2 is < 0.16 V.
Potential problem source(s):
- Defect in wiring harness
- Fault in intake-manifold pressure sensor
Terminal condition: none
Voltage condition:
- None
Temperature condition:
- None
Time condition:
- None
Other conditions:
- Engine on

Condition for fault memory entry
This fault is logged in the control module's fault memory if
it remains present for longer than 0.5 sec.

Action in service
- Visual examination of plug-in contacts (at component and
DME ends) Perform electrical measurements on sensor wire,
power supply and ground (possible intermittent open!)
- Replace sensor

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- none

Driver information
Warning light:
- ECE emissions warning lamp: on
- US emissions warning lamp: on
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: none

Service instruction
- none