P142E

110001 - P142E

Information saved in
DME

Fault code
110001 - P142E

Fault text
Cylinder injection cutout: pressure too low in high-pressure
system

Fault description
The diagnostic function monitors the high-pressure system
for pressure deviations that are primarily caused by a lack of
fuel.

Condition for fault identification
Test condition:
The fault is recognized when the fuel pressure in the high-
pressure fuel system falls below a value defined in the
program map.
Potential problem source(s):
- Tank fuel level too low
- Collateral fault
Terminal condition: none
Voltage condition:
- None
Temperature condition:
- Precatalyst temperature > 500 °C
Time condition:
- None
Other conditions:
- Engine on

Condition for fault memory entry
This fault is logged in the control module's fault memory if
it remains present for longer than 1.2 sec.

Action in service
- No additional action, as this fault is also caused by an
empty tank or other faults

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- none

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: on
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: on

Service instruction
- If a fuel-level monitoring error occurs then Sym0 can be
entered instead of Sym3