00 00 ... Tyres: Checking Inflation Pressure, Correcting If Necessary, Checking External Condition, Tread Depth and Pattern

00 00 ... Tyres: checking inflation pressure, correcting if necessary, checking external condition, tread depth and pattern

- Checking tyre inflation pressure:
- Check tyre inflation pressure in accordance with information plate on B-pillar
- Initialize Run Flat Indicator

- Checking tyre condition:
- Check tread depth of all tyres with tyre tread gauge
- Check tyre tread surfaces and side walls for incisions and foreign particles such as nails or screws
- Check tyre tread pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer and issue a separate invoice for this work

NOTE:
- For details of approved wheel-tyre combinations, refer to KSD CD
- For reasons of driving safety, only use tyres of the same type and tread pattern on a single vehicle
- Inform customer of any incorrect or worn tyres