13 62 593 Removing and Installing/Replacing Pressure Sensor on Left Intake Manifold

13 62 593 Removing And Installing/Replacing Pressure Sensor On Left Plenum Chamber (N63)







Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Turn off ignition
- Remove coolant expansion tank
- Remove fluid reservoir for hydraulic steering
- Remove water valve for heater/air conditioner and lay coolant hoses to one side
- Release suction line for hydraulic steering and place to one side, do not remove
- Secure engine in installation position







Unlock plug (1) and remove.
Release screws (2) with a reversible ratchet, extension, universal joint and a magnetic Torx socket.
Tightening torque 13 62 2AZ .
Pull pressure sensor (3) out of left plenum chamber.

Installation:
Coat sealing ring with anti-friction agent.







Installation:
clear fault memory.