00 00 ... Vehicle Test

00 00 ... - Vehicle test

Connect battery charging computer (see BMW Workshop Equipment Catalogue) to charging terminal in engine compartment.
Recharge battery 61 21 028 Charge Battery.
Connect diagnosis system.
Switch on ignition.
Carry out vehicle identification.
Click on Vehicle test.
The vehicle test is carried out.

Note:
For motor vehicle diagnostics, the vehicle test is essential for evaluating possible stored diagnostic trouble codes. In the vehicle test, the control units are physically identified in succession and their fault memories read out.
If the fault memory has been read out, the faults appear in the "Fault pattern selection" mask in the "Fault memory contents" field.
Check identified faults and if necessary rectify these faults after consulting with customer.