32 00 ... Moving Vehicle Into Normal Position

32 00 ... Moving vehicle into normal position





Necessary preliminary work:
^ Check compliance with test conditions, repair vehicle if necessary.





^ F01/ F02/ F04/ F07/F11: Version with air suspension system: Carry out ride height adjustment
^ Check vehicle interior and luggage compartment (incl. spare wheel well) for load, unload vehicle if necessary
^ Introduce DIN load (refer to Technical Data) into vehicle


32 00 ... Moving vehicle into design position





Necessary preliminary work:
^ Move vehicle into normal position





^ F01/ F02/ F07: Version with air spring system:
- Remove ignition key
- Pull fuse for air supply unit control unit
^ Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to Technical Data).
Measure vehicle ride height