Body/Interior - Rattle From Dash/Windshield Area
SI B51 36 10Body Equipment
July 2011
Technical Service
This Service Information bulletin supersedes SI B51 36 10 dated October 2010.
[NEW] designates changes to this revision
SUBJECT
Rattle Noises from Windshield Area of Dashboard
MODEL
F10 (5 Series)
[NEW] F01, F02, F04 (7 Series)
[NEW] For vehicles produced between April 2010 through December 2010
SITUATION
There is a noise from the dashboard area near the windshield while driving.
CAUSE
The gap between the dashboard and windshield is too close, or the retaining screws securing the upper area of the dashboard at the A-pillars are missing.
CORRECTION
Adjust the dashboard to the windshield gap, and replace the dashboard retaining screws with special screws with a plastic washer.
PROCEDURE
Refer to attachment B513610.
PARTS INFORMATION
[NEW]WARRANTY INFORMATION
ATTACHMENT
B513610 - Procedure
view PDF attachment