Differential Assembly: Adjustments

33 00 ... Rear axle: wheel alignment check must be carried out after the following work





Graphic F01/F02.

A wheel alignment check must be carried out after the following work:
^ Release the following screw connection:
^ Swinging arm, front/rear, to rear axle support
^ Swinging arm to integral link / wheel carrier
^ Guide arm to rear axle support / HSR unit
^ Wishbone to rear axle support / wheel carrier

^ Replacement of following parts:
1. Rear axle support
2. HSR actuator
3. Toe arm
4. Swinging arm
5. Wheel carrier
6. Integral link
7. Wishbone