61 13 ... Unlock and Disconnect Various Plug Connections In Hybrid Vehicles

61 13 ... Unlock And Disconnect Various Plug Connections In Hybrid Vehicles







IMPORTANT:
Observe the following instructions for handling high-voltage plug connections:
- Damaged high-voltage connectors must be replaced and must not be repaired.
- Dirt must be rinsed off before opening the plug connection







Electric A/C compressor (EKK):
Slide locking pin (1) in direction of arrow as far as the stop.







Press locking pin (1) upwards and pull off connector (2) in direction of arrow.







Electric motor ECU (A/C compressor high-voltage connection):
Press lock (1) up to stop.
Detach plug connection (2) in direction of arrow.







Installation note:
Push (1) up to stop.
Push lock (2) up to stop.


IMPORTANT: Lock (2) must snap audibly into place. Pull test of whether plug connection is latched.







Electric motor ECU (high-voltage connection):
Unfasten plug connection (1) and disconnect.
Push catches (2) in direction of arrow as far as stop.
Unplug connector (3).

Installation note:
Connector (3) must be correctly engaged by catch (2).







Electric motor ECU (signal connection):
Slide lock (1) in direction of arrow up to stop.
Unplug connector (2).

Installation note:
Connector (2) must be correctly engaged by catch (1).