66 54 005 Removing and Installing/Replacing Control Unit For Night Vision System

66 54 005 Removing And Installing/replacing Control Unit For Night Vision System







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Necessary preliminary work:
- Disconnect battery cable
- Remove fold-down compartment on driver's side







Release plug connections (1) and disconnect.
Release bolt (2) and remove control unit (3) in direction of arrow.







Installation note:
Guides (1) on control unit (2) must be seated correctly in the correct bracket.







Replacement:
Carry out vehicle programming and encoding.

NOTE:
New component contains a CD with deblocking code.
CD is requested during encoding/programming by the SSS.