66 31 010 Adjusting Remote Sensor (LRR Sensor)

66 31 010 Adjusting Remote Sensor (LRR Sensor)

Special tools required:







Carry out adjustment of long-range sensor (1) with special tool 36 1 130 by means of adjusting screws (2) and (3).
(2) = horizontal adjustment
(3) = vertical adjustment







Special tool required:
Active Cruise Control ACC adjusting device, complete.

Order number: 81 10 0 021 292
Consisting of:
1. Mirror, complete
2. Wheel laser
3. Slotted diaphragm
4. Control bracket (for initial installation of rail)
5. Rail
6. Setup and Owner's Handbook (not shown)

NOTE: A holder which is not included in the scope of delivery is required to support the wheel laser. Use either the quick-action clamp from the existing KDS or ACC wheel holder (36 1 100).







NOTE: Follow instructions for ACC adjusting device.







NOTE:
To adjust the ACC sensor, connect the BMW diagnosis system and fit the ACC adjusting device.
Select ACC system in diagnosis. Start test module ACC adjustment (service functions) and proceed in accordance with instructions.
Handle ACC adjusting device in accordance with mounting and Owner's Handbook provided with device.







NOTE: Further information on the ACC adjusting device can be found in the BMW Workshop Equipment and Planning Documentation.