72 12 060 Removing and Installing/Replacing Left or Right Head Airbag

72 12 060 Removing And Installing Or Replacing Left Or Right Head Airbag







IMPORTANT:
Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.







WARNING:
Read and comply with safety regulations for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.
A damaged head airbag must be replaced.
A damaged head airbag exhibits an impaired protective function and in extreme cases loses its protective function altogether.







Necessary preliminary tasks:
- Disconnect battery negative lead
- Remove headlining
- Follow instructions for unlocking and locking airbag plug connection

Installation summary, retaining elements, head airbag:












IMPORTANT:
When removing head airbag, do not damage
- Head airbag
- Windscreen
- Retaining clips
- Trim panels

Do not damage.







Release screw (1).
Tightening torque 72 12 02AZ.







Release screws (1).
Tightening torque 72 12 02AZ.

Installation:
End fitting is coded against incorrect assembly.







Release screws (1).
Tightening torque 72 12 02AZ.







Release screw (1).
Tightening torque 72 12 02AZ.







Unlock and disconnect plug (1) for gas generator.
Unfasten screws (2).
Tightening torque 72 12 02AZ.
Remove gas generator.

Installation:
Gas generator is coded against incorrect installation.