65 24 020 Removing and Installing/Replacing Blocking Circuit

65 24 020 Removing And Installing/Replacing Left Or Right Blocking Circuit







Necessary preliminary work:
- Remove trim panel for roof pillar at rear.







Equipment specification with rear A/C system.
Release screw (1).
Slide lock (2) in direction of arrow.
Feed out air duct (3).







Release screw (1).
If necessary, release screw (4).
Unlock plug connections (2) and disconnect.
If necessary, disconnect plug connection (5).
Remove blocking circuit (3) from C-pillar.

Installation note:
Position blocking circuit (3) so that positioning pin on back engages in associated bore hole.