275A - P134E (DME)

275A - P134E

Information saved in
DME

Fault code
275A - P134E

Fault text
ignition cylinder 8, activation

Fault description
Ionic Current Control Module Control Line Ignition
Cylinder 8 Open Circuit

Condition for fault identification
Test condition:
Current on PIN A_S_ICC too low with active ignition pulse
Terminal condition: TERM87
Voltage condition:
Battery voltage > 9.8V (k_diag_tr_ub_min)

Condition for fault memory entry
8 operating cycles

Action in service
1. Check plug and wiring harness at M ignition coil
2. Replace M ignition coil as indicated

Fault effect and breakdown warning
CC message
Engine speed limited
Power reduction
Rough idle

Driver information
Warning light:
MIL, EML, CC message, backup program

Service instruction
none