Wiper Arm: Service and Repair

61 61 100 - Removing and installing/replacing both windscreen wiper arms





Special tools required:
- 61 6 210 61 6 210 Wiper Arm Puller





Take off cap.





Unfasten nut. Tightening torque 61 61 11AZ 61 61 Windshield Wipers.





Important!
Risk of breakage!

Do not bend windscreen wiper arm when removing.

Detach windshield wiper arm with special tool 61 6 210 61 6 210 Wiper Arm Puller.





Installation Note:
Windscreen wiper motor must be in its rest position.

Observe adjustment dimensions 61 61 ... Adjusting Left or Right Windscreen Wiper.

Adjust position of relevant windscreen wiper arm (measured between windscreen wiper blade and trim panel on cowl panel at height of windscreen wiper arm locator).

Tighten down windscreen wiper arm and check adjustment dimensions 61 61 ... Adjusting Left or Right Windscreen Wiper of respective windscreen wiper arm again.

Check and if necessary adjust contact angle 61 61 010 Checking/Adjusting Contact Angle of Windscreen Wiper Arms on Windscreen.