11 00 ... Mounting Engine on Assembly Stand

Mounting engine on assembly stand (S65)





Special tools required:
- 00 2 300
- 11 5 260 11 5 260 Engine Support Plate






Necessary preliminary tasks:
- Remove engine.
- Remove rear water pipe.





Secure special tool 11 5 260 11 5 260 Engine Support Plate to crankcase with bolts (2).
Tighten bolts (2) evenly.

Note:
Bolts (1) are not required on the S65.





Secure engine with special tool 11 5 260 11 5 260 Engine Support Plate to special tool 00 2 300.

Note:
Picture shows S85.