Marker Lamp: Service and Repair

63 14 060 - Removing and installing/replacing front left or right side marker (M3/US)





Special tools required:
- 64 1 020






Important!
Risk of damage!

Carry out the following operation carefully so as to avoid damaging the bumper trim and side marker.





Press side marker (1) upwards with special tool 64 1 020 and feed in direction of arrow out of bumper trim (2).

Installation Note:
Retaining spring of side marker (1) must not be damaged or missing.

Make sure side marker (1) is correctly seated in bumper trim (2).