Trunk / Liftgate: Service and Repair

41 62 000 Removing And Installing Rear Lid







Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD CD (FR number 41 62 000).







Necessary preliminary work:
- Remove trim panels on rear lid.
- Disconnect all cable plug connections and pull wiring harness out of rear lid.
- Remove both gas-filled struts.







NOTE: This work step must be carried out with a second person assisting.

Release screws (1) on both sides of vehicle.
Tightening torque 41 62 1AZ.
Remove rear lid.

Installation note:
Install rear lid at screw locations on hinge. This dispenses with the need for adjustment after installation.
Adjust rear lid if necessary.

If reversing camera optional equipment installed:
Calibrate reversing camera.