12 14 524 Replacing Exhaust Camshaft Pulse Generator

12 14 524 Replacing Pulse Sensor On Exhaust Camshaft (N52T)







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary work:
- Read out the fault memory of the DME control unit.
- Switch off ignition.
- Remove acoustic cover







Release screw (1).
Tightening torque 12 90 2AZ.
Release holder (2) from cylinder head.







Release connector (1) and remove.
Release screw.

Installation note:
Replace screw.
Tightening torque 13 62 1AZ.
Remove pulse sensor (2).

Installation note:
Replace gasket.







NOTE:
Check stored fault messages.
Delete fault memory.