27 10 020 Installing Distributor Exchange Transmission (ATC 450)

27 10 020 Installing distributor exchange transmission (ATC 450)





Important!
Before and after replacement, execute the "Repair" service function with the BMW diagnosis system.





Recycling:
Catch and dispose of escaping transmission oil. Observe country specific waste disposal regulations





Necessary preliminary work:
- Drain transmission oil at oil drain plug

Tightening torque 27 10 2AZ

- Remove transfer box





Modify following parts:
- Covers and protective caps
- Drive shaft transportation retainer
- Vent hose of transfer box


Important!
After completing work, check transmission oil level and top up if necessary.





Release filler plug (1).

Check oil level.

Tightening torque 27 10 2AZ.

Pour in transmission oil up to lower edge of opening for filler plug (1).
Use only the approved transmission oil

Failure to comply with this requirement will result in serious damage to the transfer box!