63 12 010 Removing and Installing or Replacing Left Headlight (Xenon Headlight)

63 12 010 Removing And Installing Or Replacing Left Headlight (xenon Headlight)







WARNING:
Version with xenon lighting system:
Danger to life due to high voltage.
Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition device, control unit and bulb) may only be carried out by qualified personnel.







Necessary preliminary work:
- Remove front bumper trim







Release screws (1).
Tightening torque 63 12 8AZ.







Unfasten plug connection (1) and disconnect.
Release screw (2).
Tightening torque 63 12 8AZ.
Release screw (3).
Tightening torque 63 12 9AZ.
Carefully remove headlight (4) in direction of arrow.

Installation note:
Adjust headlight.







IMPORTANT: Follow instructions for handling light bulbs (exterior lights).

Replacement:
- If necessary, remove bulbs Note bulb type.







Replacement only:
- Remove ignition device for xenon headlight
- Remove control unit for xenon headlight
- Remove xenon light module