65 50 011 Removing and Installing/Replacing Video Module For On-Board Monitor

65 50 011 - Removing and installing (replacing) video module for on-board monitor





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Note:
Follow instructions for handling optical fibres 61 00 ... Notes on Handling Optical Fibers.





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove luggage compartment trim on left.





Release screws (1).
Feed out video module (2) complete with holder towards top.





Note:
The number of plug connections (1) and screws (2) can vary, depending on the video module version.

Disconnect plug connection (1).

Release screws (2) and remove holder from video module for on-board monitor.





Replacement:
Carry out vehicle programming and coding Programming and Relearning.
After replacing the video module and programming, it is absolutely essential to reset the TV standard of the country in question.