Gearing for Head Restraint Adjustment

52 17 035 Removing And Installing/Replacing Gearing For Head Restraint Adjustment







Necessary preliminary tasks:
- Remove shaft for head restraint adjustment







Release screws (4) on left and right.
Tightening torque: 52 10 10AZ.
Remove retainer (1) on left and right.
Remove gearing (2) on left and right straight towards front.

Installation:
To ensure identical adjustment of gearings (2), carry out following work step on both gearings:
- Unscrew component (5) until threaded rod (6) is flush with edge (3).