13 62 592 Removing and Installing/Replacing Pressure Sensor on Right Intercooler

13 62 592 Removing And Installing/Replacing Pressure Sensor On Right Intercooler (S63)







Necessary preliminary tasks:
- Read out fault memory of DME control unit.
- Turn off ignition
- Remove intake filter housing







Unclip Bowden cable for engine bonnet/hood actuator from transverse reinforcement (1).
Release screws on left and right.
Tightening torque 51 71 4AZ.
Remove cross-brace (1).

Installation:
Reinstall left and right holder for vacuum filter housing.







Unlock plug (1) and remove.
Unfasten screws (2).
Tightening torque 13 62 7AZ.
Pull pressure sensor (3) out of right intercooler.

Installation:
Replace sealing ring on pressure sensor.







Installation:
Delete fault memory.