Removing and Installing/Replacing Power Window Switch (Passenger Side)

61 31 118 Removing And Installing/replacing Power Window Switch (passenger Side)

Special tools required:







IMPORTANT:
Carry out the following operation carefully so as to avoid damaging the door trim panel and switch.
If necessary, tape off working area.

Lever power window switch (1) with special tool 00 9 317 in direction of arrow out of armrest.
Disconnect associated plug connection and remove power window switch (1).







Installation:
Retaining hooks (1) of power window switch (2) must not be damaged.
Make sure power window switch (2) is correctly seated in armrest.