61 12 850 Replacing Ribbon Cable (CAS)

61 12 850 - Replacing ribbon cable (CAS)






Important!

Read and comply with notes on handling wiring harnesses and cables 61 00 ... Notes on Handling Wiring Harnesses and Cables






Necessary preliminary tasks:

- Remove Start/Stop switch Service and Repair
- Remove trim for pedal assembly 51 45 185 Removing and Installing/Replacing Panel For Pedals






Disconnect plug connection (1).






Note:

Instrument panel (2) removed for purposes of clarity.

Pull off insulating tape (1) with ribbon cable (3) from instrument panel (2).

Installation Note:

Make sure ribbon cable is laid correctly.
Secure ribbon cable with new insulating tape to instrument panel (2).