37 15 ... Removing and Installing/Replacing Control Unit For Vertical Dynamics Management

37 15 ... Removing and installing/replacing control unit for vertical dynamics management





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection).





Necessary preliminary tasks:
^ Remove ignition key
^ Disconnect battery negative lead
^ Remove flap in luggage compartment panel on right

Lift back insulating mat (1).








Disconnect plug connection (1).

Unlock catches (2) and remove control unit (3).





After installation:
^ Replacement only: Carry out programming/coding
^ Replacement only: Carry out ride-height- calibration