Removing And Installing Rear Lid Upper Section

41 62 005 Removing And Installing Rear Lid Upper Section







Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD CD (FR number 41 62 005).







Necessary preliminary work:
- Remove spoiler.
- Remove trim panels on tailgate upper section.
- Disconnect all cable plug connections and pull wiring harness out of tailgate.
- Remove both gas-filled struts.

NOTE: This work step must be carried out with a second person assisting.







Close rear lid upper section.
Release screws (1) on both sides of vehicle.
Tightening torque 41 62 1AZ.
Remove tailgate upper section.

Installation note:
Install rear lid upper section at screw locations to hinge. This dispenses with the need for adjustment after installation.
If necessary, adjust tailgate upper section.

If reversing camera optional equipment installed:
Calibrate reversing camera.

;xT: