Seat Cover For Rear Seat (Through-Loading System)

52 26 400 - Replacing seat cover for rear seat (through-loading system)





Special tools required:
- 52 0 050 Tools and Equipment





Necessary preliminary tasks:
- Remove rear seat Removing and Installing / Replacing Rear Seat





Open tension cable (1).
Remove tension cable from wire eyelets (2).





Disconnect retainers in marked area
Remove all remnants of clips from cover and support.





Installation:
Insert new retainer (2) with special tool 52 0 050 Tools and Equipment and bend closed.

1. Padding
2. Retainer
3. Trim thread in padding
4. Trim thread in seat cover
5. Seat cover