54 10 025 Replacing the Gate For the Slide/Tilt Sunroof At the Front Left and Right

54 10 025 Replacing the gate for the slide/tilt sunroof at the front left and right







When removing and installing the gate for the front slide/tilt sunroof, also note the interactive 3-D instructions. It does not replace but enhance the applicable repair instructions. Press the individual point for animation display of the corresponding operations.
- 3-D animation of glass slide/tilt sunroof cover mechanism (step 4 to 6 and 27 to 30)







Necessary preliminary tasks:
- Remove glass slide/tilt sunroof cover at front
- Open slide/tilt sunroof.







Bend open clamps of retaining rail (1) with suitable tool (2).
Lift retaining rail (1) in direction of arrow.

NOTE: Observe 3-D animation step 4 (29).

IMPORTANT: Do not damage plastic holder.







Lift guide (1) of gate with suitable tool (2) in direction (A) and push in direction (B).

NOTE: Observe 3-D animation step 5 (28).







NOTE: Distances (1) must be clear as shown so that gate (2) can be removed.







Press gate (1) out of guide in direction (A) and lift in direction (B).

NOTE: Observe 3-D animation step 6 (27).

Installation note:
Observe grease instructions for replacement parts.







Installation note:
Ensure that lugs (1) are parallel to gate (2).

NOTE: Observe 3-D animation step 30.







Installation note:
Clamps (1) of retaining rail must be bent again.

NOTE: Observe 3-D animation step 29.