Removing and Installing / Replacing Backrest Cover For Left or Right Rear Seat

52 30 413 - Removing and installing/replacing backrest cover for left or right rear seat





Special tools required:
- 52 0 050 Tools and Equipment





Necessary preliminary tasks:
- Remove rear panel
- Remove head restraint guide Removing and Installing / Replacing Rear Left or Right Head Restraint Guide





Disengage welt in marked area from backrest frame.





Move backrest back.
Lever out welt in marked area from backrest frame.
Remove backrest cover with padding.





Open Velcro-type fastener in marked area.





Detaching cover and padding:
- Release all retainers in marked area
- Remove cover from padding
- Remove all remnants of retainers from cover and padding





Installation:
Insert new retainer (2) with special tool 52 0 050 Tools and Equipment and bend closed.

1. Padding
2. Retainer
3. Trim wire in padding
4. Trim wire in seat cover
5. Backrest cover





Replacing cover:
- Pull all trim wires out of backrest cover
- If necessary, cut pockets for trim wires in new backrest cover
- Push trim wires into backrest cover pockets