Cruise Control: Adjustments

66 31 010 Instructions For ACC Adjusting Device







Requirements for the measurement area for ACC adjusting device

Dimensions:
1. Area behind the mirror of at least 80 cm that cane be entered
2. Distance between mirror and vehicle 80 cm +/- 5 cm
3. Total area of work area 360 cm x 660 cm

Maximum irregularity of floor surface:
- Floor surface - adjusting device ≤ 1 mm
- Floor surface - vehicle ≤ 10 mm







Maximum angle of inclination of floor surface - vehicle:
- Downward incline of floor surface maximum 3�, see graphic above (1)
- Upward incline of floor surface maximum 1�, see graphic above (2)

NOTE:
Setting up the ACC adjusting device (one-off task) comprises the following steps:
- Assembly of adjusting device
- Assembly of rail
- Basic setting of adjusting device on measurement area

Detailed instructions for setup and operation are enclosed with every ACC adjusting device.