65 77 720 Removing and Installing/Replacing Left B-pillar Sensor

65 77 720 Removing And Installing (Replacing) Left B-pillar Sensor







WARNING:
Note airbag safety instructions.
Incorrect handling can activate airbag and cause injury.







Necessary preliminary tasks:
- E72 Only:Remove both negative battery cables
- Disconnect battery negative lead and cover
- Remove front entrance cover strip







Release screw (1).

Installation:
Replace screw (1).
Tightening torque 72 11 01AZ.

Unlock inertia reel unit (2) and remove from B-pillar.

Installation:
Inertia reel unit (2) is coded against
incorrect installation (3).







Release screws (1).
Slacken screw (2) and feed out sensor.
Tightening torque 65 77 3AZ.
Disconnect plug connection (3).

Installation:
Replace microencapsulated screws (1, 2).







Installation:
Establish correct positioning of B-pillar sensor (1) by means of guide pin (2) and screw (3).
Replace microencapsulated screws (3).

�� :

' !R :