51 16 160 Removing and Installing/Replacing Centre Console Trim (Gear Selector Switch)

51 16 160 Removing And Installing/Replacing Centre Console Trim (Gear Selector Switch)

Special tools required:







Necessary preliminary tasks:
Only for vehicles with production date before 10/2009 (without M models):
- Remove knob for controller







IMPORTANT:
Risk of damage.
Carry out the following operation carefully so as to avoid damage.
Tape off decorative trim on centre console in working area.







Lever centre console trim (1) with special tool 00 9 317 out of centre console and remove.

Installation:
Replace faulty retaining clips (2).