52 26 200 Removing and Installing/Replacing Rear Panel on Right Rear Seat Back

52 26 200 Removing And Installing/Replacing Rear Panel On Right Rear Seat Back







Necessary preliminary tasks:
- Remove rear seat back







Unclip lock trim on backrest edge in direction of arrow (1).
Slide back of lock trim in outward direction and remove in direction of arrow (2).







Installation:
Retaining lugs on trim must not be damaged.







Lever backrest cover all round out of backrest frame.







Detach rear panel (2) with flat scraper (1) from rear seat back.

Installation:
Comply with instructions issued by manufacturer of universal spray adhesive.
Apply universal spray adhesive to rear panel and rear seat back.
Fit and align rear panel within the air drying time (see manufacturer's instructions).
Observe and adhere to curing time to prevent rear panels from slipping.