Trunk / Liftgate: Service and Repair

41 62 000 Removing And Installing Rear Lid







Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD CD (FR number 41 62 000).

Necessary preliminary tasks:
- Remove panel for rear lid
- Disconnect all plug and socket cable connections on rear lid.







Operation is described on the left side. Right side identical.
Release screws (1).
Tightening torque 41 62 1AZ.
Remove rear lid.

Installation:
Adjust rear lid.







Replacing rear lid:
On vehicles without an additional aerial, designated opening (1) must be sealed with 40 x 40 mm masking foil.
Masking foil, see Electronic Parts Catalogue.

��T: