Differential Assembly: Adjustments

33 00 ... - Rear axle: wheel/chassis alignment check must be carried out after the following work





A wheel/chassis alignment check 32 00 155 KDS Chassis/Wheel Alignment Check With Ride Height Measurement Without Vehicle Load must be carried out after the following work:
- Release of following screw/bolt connections:

- Bearing block to trailing arm / body

- Upper control arm to trailing arm

- Lower control arm to trailing arm

- Replacement of following parts:

1. Rear axle carrier

2. Lower control arm

3. Trailing arm / rubber mount / bearing block

4. Upper control arm