25 11 211 Replacing Shift Arm For Shift Lever Mount

25 11 211 - Replacing shift arm for shift lever mount





Necessary preliminary tasks:
- Remove shift lever 25 11 000 Removing and Installing Shift Lever





Lever support bearing (1) out of fixture.





Installation:
Install support bearing (1) with arrow (2) facing upwards in holder.





Unlock bearing pin (1) in direction of arrow and remove.

Installation:
Grease bearing pin.
Grease, refer to BMW Service Operating Fluids.





Remove shift arm.
Detach support bearing (1) from shift arm.

Installation:
Grease bearing journal.
Grease, refer to BMW Service Operating Fluids.
Attach support bearing (1) with opening (3) towards rear on shift arm.





Replace bearing bush 25 11 235 Replacing Bearing Bushes for Shift Arm (1) if damaged.