51 46 072 Removing and Installing/Replacing Lower Partition Panel

51 46 072 Removing And Installing/Replacing Lower Partition Panel







Necessary preliminary tasks:
- Clamp off battery lead from negative terminal
- Remove centre console.
- Remove upper partition trim panel
- Remove rear side trim panel (bottom)







NOTE: Both seats are shown removed for purposes of clarity.







Professional HiFi system only:
Release mid-range speaker screws (2).
Unlock plug connection for mid-range speaker and disconnect.
Remove mid-range speaker.







Release screws (1).
Tightening torque 51 46 7AZ.
Remove clips (2).
Raise protective caps for storage net holder and release screws (3).
Tightening torque 51 46 7AZ.







Release partition panel (1) at catches (2).
Disconnect necessary plug connections.
Remove partition panel (1).

Replacement
Modify covers or lashing eyes (4).

Professional HiFi system only:
Modify speaker covers of bass speaker on left and right.