54 37 140 Replacing Roof Module

54 37 140 - Replacing roof module






Special tools required:
- 00 9 450
- 54 0 101
- 54 0 180
- 54 0 190






Necessary preliminary tasks:
- Remove roof module






Set removed roof module down on inside of lid of transportation crate and bolt down.
Changeover special tool 54 0 101 to new roof module.






Check distanced between left and right brackets and left and right main mounts:
1. Measure distance between guide pins.
2. Measure distance between rear threaded studs.






Check measured lengths between the main mounts.
If necessary, use rotary sleeve (1) to adjust measured distance between the guide pins.
If necessary, use rotary sleeve (2) to adjust measured distance between the threaded studs.






Release screws (1).
Tightening torque: 54 37 13AZ.
[1][2]Specifications
00 00 Excerpt From Company Standard BMW GS 90003-2

Slacken lock nut with special tool 54 0 190.
Turn back barrel screws by approx. 3 mm.
Tightening torque: 54 37 22AZ.
[1][2]Specifications
00 00 Excerpt From Company Standard BMW GS 90003-2

Installation:
Tighten barrel screws only with special tool 54 0 180 together with 00 9 450.






Install roof module in vehicle.
Gauge coupling fastener.
Set down removed roof module with assembly carrier from inside of transportation crate and bolt down.
Remove assembly carrier.