Removing and Installing/Replacing Engine Oil Cooler

17 11 150 - Removing and Installing/Replacing Engine Oil Cooler (N54)






Warning!
Danger of scalding!
Only perform this work after engine has cooled down.






Important!
Wear protective goggles and gloves.






Necessary preliminary tasks:
- Remove right wheel arch cover 51 71 038 Removing and Installing/Replacing Front Left or Right Wheel Arch Cover (Front Section) front section






Recycling:
Engine oil escapes when oil lines are released. Catch and dispose of emerging engine oil.
Observe country-specific waste-disposal regulations.






Release screw (1).
Tightening torque 17 21 2AZ.
17 21 Engine Oil Cooler And Lines
00 00 Excerpt From Company Standard BMW GS 90003-2
Detach engine oil line.
Engine oil escapes when oil lines are released. Catch and dispose of emerging engine oil.
Observe country-specific waste-disposal regulations.
Unfasten screws (2).
Tightening torque 17 21 3AZ.
17 21 Engine Oil Cooler And Lines
00 00 Excerpt From Company Standard BMW GS 90003-2
Feed out engine oil cooler (3) and remove.






Installation Note:
Replace sealing rings on engine oil lines.






Note:
After completing work, check engine oil level and top up engine oil if necessary.