Air Cleaner Housing: Service and Repair

13 71 000 - Removing and installing/replacing intake filter housing (N54)





Necessary preliminary tasks:
- Remove intake duct





Unlock and disconnect line (1).
Unclip line (1) from intake filter housing.
Release clamp and detach air intake hose.
Tightening torque 13 71 5AZ 13 71 Intake Silencer.





Release clamp and detach air duct.
Tightening torque 13 71 5AZ 13 71 Intake Silencer.
Pull off wiring harness holders (1) in upward direction.
Detach intake filter housing (2) from bearing journal and remove.

Installation:
Make sure intake filter housing is correctly seated on bearing journal.





Note:
Assemble engine.