Campaign - Install Navigation Road Map Database 2013
SI B65 15 12Audio, Navigation, Monitors, Alarms, SRS
October 2012
Technical Service
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.
SUBJECT
Service Action: CIC - Install Navigation Road Map Database 2013
MODEL
E70
E71
E82
E84
E88
E89
E92
E93
F06
F12
F13
F25
F30
Vehicles with option 609 (Navigation System Professional, CIC)
SITUATION
Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
Note:
The INITIAL enabling code "FSC CIC map, N. America 2013 INITIAL" is necessary to start the installation process and to activate the road map database.
AFFECTED VEHICLES
This Service Action involves E70, E71, E82, E84, E88, E89, E92, E93, F06, F12, F13, F25 and F30 vehicles which were produced from March 2012 to December 2012.
In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 628. If code number 628 has been punched out, the campaign has already been performed. If code number 628has not been punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action.
PROCEDURE
Step 1: Check the "in-service" date of the affected vehicle in the DCSnet Warranty Vehicle Inquiry.
^ If the vehicles in-service date is before November 1, 2012, no further action is required.
^ If on or after November 1, 2012, the vehicle is:
A "new vehicle in stock" (no in-service date in DCSnet); or
The vehicle has an in-service date in DCSnet on or after November 1, 2012. Perform Step 2.
Step 2: Check the installed road map database using the Key Reader.
A. If the Key Reader shows "Road Map North America Premium 2013," no further action is required.
B. If the key reader shows "Road Map North America Premium 2012," refer to and perform the attached installation procedure.
PARTS INFORMATION
LABEL INSTRUCTIONS
This Service Action has been assigned code number 628. After the vehicle has been checked and/or corrected, obtain a label (SD 92-417) and:
A. Emboss your BMW center warranty number in the middle of the label (1);
B. Punch out code number 628 (2), printed on the label; and
C. Affix the label to the B-pillar as shown.
If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on top of another one, because a number from an underlying label could appear in the punched-out hole of the new label.
WARRANTY INFORMATION
PROCEDURE FOR CIC NAVIGATION ROAD MAP DATABASE INSTALLATION VIA USB STICK
PART - 1 ORDERING AND DOWNLOADING THE INITIAL ENABLING CODE
PART 2 - CIC NAV ROAD MAP DATABASE 2013 INSTALLATION VIA USB STICK