| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Diagnose/Test |
| Oil Leak, Diagnosis | 1.0 | 0.0 | B | |
| General Troubleshooting And/Or Repair |
| Thirty Minutes | 0.5 | 0.0 | A | |
| One Hour | 1.0 | 0.0 | A | Add Additional Increments As Required. |
| Two Hours | 2.0 | 0.0 | A | Add Additional Increments As Required. |
| Note |
| Additional Thirty Minutes, Add | 0.5 | 0.0 | A | |
| Replace |
| Complete Assembly Without Transfer Of Parts |
| Manual Trans | 13.4 | 9.3 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment. |
| Auto Trans | 14.5 | 10.1 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment. |
| Complete Assembly With Transfer Of Parts |
| Manual Trans | 16.9 | 12.1 | B | Includes: Transfer All Fuel And Electrical Units. Does Not Include: Transfer Of Optional Equipment. |
| Auto Trans | 17.3 | 12.7 | B | Includes: Transfer All Fuel And Electrical Units. Does Not Include: Transfer Of Optional Equipment. |
| Short Block |
| Manual Trans | 26.4 | 0.0 | A | Includes: R&I Engine And Transfer All Necessary Components. |
| Auto Trans | 26.8 | 0.0 | A | Includes: R&I Engine And Transfer All Necessary Components. |
| Long Block |
| Manual Trans | 21.4 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components. |
| Auto Trans | 21.8 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components. |
| Overhaul/Rebuild |
| Manual Trans | 36.2 | 25.2 | A | Includes: Disassemble & Clean Engine, Ridge Ream & Hone Cylinders, Fit Pistons, Rings, Pins, Main & Rod Bearings, R&I Engine, Grind Valves & Tune-Up. |
| Auto Trans | 37.2 | 26.0 | A | Includes: Disassemble & Clean Engine, Ridge Ream & Hone Cylinders, Fit Pistons, Rings, Pins, Main & Rod Bearings, R&I Engine, Grind Valves & Tune-Up. |