61 35 107 Removing and Installing/Replacing Junction Box Electronics

61 35 107 - Removing and installing or replacing Junction Box electronics





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) .





Necessary preliminary tasks:
- Disconnect battery negative lead
- Remove footwell side trim panel on A-pillar, right
- Remove trim for instrument panel , bottom right





Note:
Glovebox removed for purposes of clarity.

Disconnect plug connection (1).
Release screws (2) and remove junction box electronics (3) from holder.





Disconnect plug connection (1).

Installation Note:
Make sure junction box electronics is correctly seated on plug connection (2) of holder.





Replacement:
Carry out vehicle programming/coding .
Delete transport mode.