Tow Sensor: Service and Repair

65 75 055 Removing And Installing/Replacing Emergency Power Siren With Tilt Sensor







Necessary preliminary work:
- Remove guide for bumper at rear right







Secure guide for bumper (3) against falling out.
Unfasten plug connection (1) and disconnect.
Slacken nut (1).







Unlock catch (1).
Remove emergency power siren (2) from guide for bumper (3).
Catch (1) must not be damaged.
Make sure emergency power siren (2) is correctly seated on guide for bumper (3).







Replacement:
Carry out vehicle programming/encoding.