65 12 210 Removing and Installing/Replacing Radio Receiver - CHAMP

65 12 210 Removing and installing/replacing radio receiver - CHAMP







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary work:
- Disconnect battery earth lead
- Remove radio and IHKA controls







Release screws (1).
Pull out the CHAMP (2) to the front.

Installation note:
Make sure CHAMP (2) is correctly seated on retaining lugs at the marked points.







Release plug connections (1) and disconnect.
Remove CHAMP (2).







Replacement:
Carry out vehicle programming/coding.