65 13 057 Removing and Installing/Replacing Speaker System (High End Sound System, In Dashboard Trim Panel)

65 13 057 Removing and installing/replacing speaker system (High End sound system, in dashboard trim panel)

Special tools required:







Necessary preliminary tasks:
- Remove cover on speaker system







Use special tool 00 9 340 to unclip cover (1) at marked points.







Clamps on cover (1) must not be damaged.
Replace clamps if necessary.







Disconnect plug connection (2).
Remove cover (1).







Release screws (1).
Remove speaker system (2) from dashboard.







Unfasten plug connection (1) and disconnect.
Remove speaker system (2).







Installation note:
Speaker system (1) must be adjusted.

Observe the following notes for this:
- Insertion of speaker system (1) in dashboard
- Placement of cover (2), this precentres of speaker system
- Removal of cover (2) and screw connection from the two front screw points
- Renewed placement of cover (2) and if necessary subsequent centring of speaker system
- Removal of cover (2) and screw connection from the two rear screw points
- Renewed placement of cover (2)
- If joint speaker system (1) not OK, then manual fine tuning of joint