51 71 482 Removing and Installing/Replacing Left or Right Tension Strut (on Rear Axle)
51 71 482 Removing And Installing/Replacing Left Or Right Tension Strut (on Rear Axle)
IMPORTANT:
Observe safety information for raising the vehicle
Driving without the tension strut is not permitted.
Only on F12, F13:
Release expanding rivet (1) and remove cover (2).
Release screw (2) M12x1.5x53.
Tightening torque 51 61 12AZ.
Installation note:
Replace screw (2), tighten to specified torque and angle of rotation.
Release screw (3) M12x1.5x70.
Tightening torque 51 61 10AZ.
Installation note:
Replace screw (3), tighten to specified torque and angle of rotation.
Unscrew nuts (4).
Tightening torque 51 61 11AZ.
Remove tension strut (1).